Our sunbathing floating turtle trap consists of an all welded aluminum frame and flippers with stainless steel hinges.
The 23″x25″x16″ cage is made from PVC coated galvanized panels and the floats are molded vinyl fenders. The live trap will hold up to 50 adult turtles with the wide flippers preventing any escape. A single turtle trap is all that is needed for smaller ponds. We typically recommend adding a trap for every 4-5 acres of water.
Floating Turtle Trap Specifications
23″ x 25″ x 16″ PVC Coated Galvanized Cage
Stainless Steel Hinges
Molded Vinyl Fenders
Capacity: 50 adult turtles
Your Pond King Floating Turtle Trap will catch the most turtles when the water is cooler and turtles are looking to get up and sun bathe. Expect higher numbers at first and a declining catch as turtles are removed. We have seen as many as 125 turtles removed from a 1 acre pond in one season!
The most common turtle is commonly referred to as the red eared slider. These turtles are considered omnivorous, consuming aquatic insects, tadpoles, snails, crawfish, juvenile fish, dead animals, and plants. They will consume fish food readily, but the major problem they pose is the destruction of spawning beds of both bluegill and bass. A single female will lay 1-3 clutches of 4-23 eggs each during a season, so keep your Pond King Turtle Trap in year round to keep the numbers of Red Eared Turtles in check.
How to Set the Floating Turtle Trap
1. Tie one end of the shorter rope to the turtle trap frame and the other to the weight (we recommend a brick or 1/2 cinder block)
2. Tie one end of the longer rope to the trap.
3. Put the weight and turtle trap on the bank on one side of the pond. Take the longer rope in hand and walk to the other side of the pond. Pull the rope to move the trap and weight into the pond. We recommend having the trap at least 30′ from the shoreline.
4. Tie the free end of the rope to a stake at the bank.For larger ponds and lakes you will need to use a boat. Attach an anchor to the turtle trap like in step 1 above. Take the trap and weight out into the pond at least 30′ from the shoreline. Drop the weight and trap into the pond.
~ Check the turtle trap and remove any turtles about every two weeks.
~ Remove other floating surface debris to increase catch frequency.
Our Pond King floating turtle trap carries a 5 year warranty on the frame/welds.
The Pond King Floating Turtle Trap is shipped to you via Fed Ex Ground with a welded box frame and cage ready to go. You will attach the floats and flippers with the included hardware in just a few minutes.
Shipping Box Dimensions: 28″x28″x16″, 28 lbs
Download the assembly instructions for the Pond King Turtle Trap HERE.